Other Main Functions; Assigning Titles To The Sources - JVC KD-LH552 Instructions Manual

Other main functions

Assigning titles to the sources

You can assign titles to CDs (both in this
receiver and in the CD changer) and the
external components (LINE-IN and EXT-IN).
Sources
CDs/CD-CH
External components
• You cannot assign a title to CD Text or an
MP3/WMA disc.
1
Select the source.
• For a CD in this receiver: Insert a CD.
• For CDs in the CD changer: Select
"CD-CH," then select a disc number.
• For external component: Select
"LINE-IN" or "EXT-IN."
2
3
Assign a title (in this example, to a
CD).
1 Select a character set.
2 Select a character.
Maximum number of
characters
Up to 32 characters
(up to 30 discs)
Up to 8 characters
3 Move to the next character position.
4 Repeat steps 1 to 3 until you finish
entering the title.
4
To erase the entire title
In step 3 on the left....
Available characters on the display
In addition to the Roman alphabets (A – Z,
a – z), the following characters will be used.
• These characters are also used to show the
various information on the display.
Upper case
Lower case
Numbers and symbols
37