Replacing Components Of The Acs Or Shark Electronics - Invacare Tornado Service Manual

Service Manual
6.2

Replacing components of the ACS or Shark electronics

This chapter will explain how to replace the components of either the ACS or the Shark electronic
systems on the Tornado.
Requirements:
•
Large flat-bladed screwdriver
•
Phillips screwdriver
•
Hexagonal socket head key 4 mm
•
Use the flat-bladed screwdriver to carefully
pry the plastic cover off, as shown in the
picture.
The picture at right shows the positions of the
CLAM and the Power Module of the ACS
System. The Shark Power Module is located in
exactly the same position as it's ACS
counterpart.
1) CLAM (or Lighting Module)
2) Power Module (partly hidden by cables)
•
Remove all electrical connectors from the
module that needs to be replaced.
As at: 19.03.2004 Page 27
Tornado