Select Your Installation Method - Axis 210 User Manual

AXIS 210/211 - Select Your Installation Method
10

Select Your Installation Method

The AXIS 210/211 is designed for installation on an Ethernet network. This involves
assigning it an IP address, automatically (via e.g. DHCP) or manually. Several installation
methods are available. The one to use depends on how your network is configured. If
unsure of the method to use, please consult your network administrator, or see the
network's documentation.
• If your network has an Internet connection (with no HTTP proxy) and uses a DHCP server
to assign IP addresses, use the One-Click installation procedure. See page 11.
• If your network uses dynamic IP addressing and your computer is running the UPnP
service, the AXIS 210 will automatically be detected and displayed on your screen. See
page 12.
• If the above methods cannot be used, you will need to assign an IP address manually,
using either the AXIS IP Utility, (see page 12) or the ARP/Ping method, as described on
page 13.
• If you are using e.g. a home broadband router, you may find it convenient to view the
router's administration pages to discover which IP address has been assigned to your AXIS
210. Please consult the router's documentation for further information.
• The default static IP address for the AXIS 210 is 192.168.0.90
UPnP is a certification mark of the UPnP
TM
Implementers Corporation.
TM
TM