System Options; Security; Date & Time - Axis 210 User Manual

System Options

Security

User access control is enabled by default. An administrator can set up other users, by
giving these user names and passwords. It is also possible to allow anonymous viewer
login, which means that anybody may access the Live View page, as described below:
Users - the user list displays the authorized users and user groups (levels):
Viewer
Provides the lowest level of access, which only allows access to the Live View page.
Operator
An Operator can view the Live View page, create and modify event types and adjust certain other
settings. Operators have no access to the Systems Options.
Administrator
An administrator has unrestricted access to the Setup Tools and can determine the registration of
all other users.
User Settings - check the relevant checkboxes to enable:
• Anonymous viewer login - allows any viewer direct access to the Live View page.
• Maximum number of simultaneous viewers - enter a value here to restrict the number
of viewers accessing the unit. This is useful if you need to save on bandwidth.
IP Address Filter
The administrator can add up to 256 IP addresses to the Allowed IP Addresses list. If the IP
address filtering checkbox is checked, only the IP addresses in the list will be allowed
access to the camera.
The users from these IP addresses need to be specified in the user list with the appropriate
access rights (User, Operator or Administrator.)
Referrals - to prevent unauthorized sources from including the video stream from the
AXIS 210/211 into external Web pages, check the Referrals checkbox and enter the IP
address or Host name of the computer that hosts the Web pages with the included video
stream. Several IP addresses/host names can be defined and are separated by semicolons(;)
Note:
When you are restricting referrals, but also wish to allow normal viewing of the Live View page, the AXIS
210/211's IP address or host name must also be added to the list of allowed referrers.
Date & Time
Current Server Time - displays the current date and time (24h clock). The time can be
displayed in 12h clock format in the Overlay Images (see below).
New Server Time - Select your time zone from the drop-down list and check the daylight
saving time changes, if desired.
AXIS 210/211 - System Options
33