Overview - Axis 210 User Manual

Overview

AXIS 210
Status
indicator
Underside
Power Connector - For connection of the PS-K power adapter (included).
I/O Connector block - The I/O terminal connector block provides the physical interface to
1 transistor output, 1 digital input and an auxiliary connection point for DC power. For
more information, see The I/O Terminal Block, on page 43.
Network Connector - The AXIS 210/211 connects to the network via a standard RJ45
connector. Supporting NWAY, the AXIS 210/211 detects the speed of the local network
segment (10BaseT/100BaseTX Ethernet). This socket can also be used to power the AXIS
211 via PoE (Power over Ethernet).
Serial Number - This number is used during installation. See page 10.
Control Button - Press this button to install using the AXIS Internet Dynamic DNS Service
(see page 11) or to restore the factory default settings, as described in Resetting to the
Factory Default Settings, on page 38.
Status
indicator
Focus puller
DC-Iris
DC-Iris control cable
(AXIS 211 only)
Serial number
Control button
Power indicator
Network indicator
AXIS 210/211 - Product Features
AXIS 211
Tele/wide puller
Rear panel
Power connector
Control
cable
I/O terminal
connector
Network connector
(and PoE for AXIS 211)
7