Table of Contents
Advertisement
Base
1 1
BOTTOM VIEW
• Place the base on a flat surface
so that the bottom faces you.
• Insert and "snap" the rear wheels
into the sockets in the base.
Hint: This may require some force.
• Pull up on the rear wheels to be
sure each is secure to the base.
Front Wheels
1 2
• Fit the front wheels to the front
axle, as shown.
• Insert a screw into each front
wheel and tighten.
Assembly
Rear Wheels
Front Axle
4
1 3
• Fit the front wheel assembly to
the base, as shown.
• Insert four screws into the front
wheel assembly and tighten.
Head
1 4
FRONT VIEW
• Turn the base assembly upright.
• Fit the head onto the
base assembly.
Advertisement
Table of Contents
