Page 1
T4654 Please keep these instructions for future reference, as they contain important information. Requires three “AA” batteries (included) for operation. Adult assembly is required. Tool required for assembly: Phillips screwdriver (not included). www.fisher-price.com...
Page 2
Assembled Parts Backboard Bracket Base 2 Feet #6 x ” Screw – 6 Tighten and loosen all screws with a Phillips screwdriver. Do not over-tighten. This product contains small parts in its unassembled state. Adult assembly is required. • Fit the feet onto the base, as shown. Hint: The feet are designed to fit onto the Post base one way.
Page 3
• Turn the base assembly upright. • Fit the post into the base. Push to “snap” the post in place. Pull up on the post to be sure it's secure. Hint: The post is designed to fit into the base one way. If it does not seem to fit, turn it around and try again.
Battery Replacement 1,5V x 3 “AA” (LR6) For best performance, we recommend replacing the batteries that came with this toy with three, new “AA” (LR6) alkaline batteries. • Locate the battery compartment on the back of the toy. • Loosen the screws in the battery compartment door and remove the door.
Height Adjust LIFT PRESS LOWER LOWER • The backboard can be adjusted to three different heights. • Press the button on the back of the post and slide the backboard all the way down for Sit & Play or all the way up for Stand &...