Page 1
T4337 T4337 Please keep this instruction sheet for future reference, as it contains important information. Requires three “AA” batteries (included) for operation. Adult assembly is required. Tool required for assembly: Phillips screwdriver (not included). Wipe this toy with a clean, damp cloth. Do not immerse.
Parts Front Legs Rear Legs Inflatable Ball #8 x ¾" Screw - 5 Tighten all screws with a Phillips screwdriver. Do not over-tighten. parts in its unassembled state. Front Legs Body • Fit the tab on the front legs into the opening under the head on the body.
Page 3
Rear Legs • Fit the rear legs into the body, as shown. • Insert the four screws into the holes near the rear legs and tighten. Feet • Fit the feet onto the end of each leg. Push to “snap” each foot in place. Hint: Each foot is designed to fit one way.
Battery Replacement 1,5V x 3 “AA” (LR6) For best performance, we recommend replacing the batteries in this toy with three, new “AA” (LR6) alkaline batteries. • Locate the battery compartment on the bottom of the toy. • Loosen the screws in the battery compartment door and remove the door.
Page 5
Sit, Crawl & Cruisin’ Fun! Power/Volume Switch • Slide the power/volume switch to ON with low volume or ON with high volume • Spin the roller ball or press the lion’s nose to watch the lights, and listen to fun songs and silly sounds! •...