Battery Installation 1,5V x 3 “AA” (LR6) • Locate the battery compartment on the bottom of the toy. • Loosen the screw in the battery compartment door and remove the door. • Insert three, new “AA” (LR6) alkaline batteries. Hint: We recommend alkaline batteries for longer battery life. •...
CONSUMER ASSISTANCE 1-800-432-5437 (US & Canada) 1300 135 312 (Australia) Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052. Hearing-impaired consumers: 1-800-382-7470. Outside the United States: Canada: Mattel Canada Inc., 6155 Freemont Blvd., Mississauga, Ontario L5R 3W2; www.service.mattel.com. Great Britain: Mattel UK Ltd, Vanwall Business Park, Maidenhead SL6 4UB.
Page 5
Walls • Fit the upper and lower walls together, as shown. 4 Screws • Insert four screws into the holes in the wall assembly and tighten. Assembly Bases • Place the bases on a flat surface, as shown. • Fit the wall assembly into each base and push to Hint: The wall is designed to fit the bases one way.
Page 6
Ramp Labeled 3 • Locate the ramp labeled • Fit the ends of the ramp into the slots in the wall and base, as shown. Hint: The tab at the top of the ramp has a green dot on it. Match this dot to the slot with the green dot.
Page 7
Car Lift • Fit the tabs on the car lift into the slots on the wall, as shown. Balconies • Fit the balconies into the slots in the wall assembly, as shown. Hint: The balconies are designed to fit one way. If a balcony does not seem to fit, turn it over and try again! •...
Page 8
• Slide the cars down the ramps for spiral speed action! • Lower the sign for stop lights and fun sounds! • Lift and lower the gas hose for car sounds. Spiral Speed Action! • Slide the power switch on the bottom of the toy ON Power Switch Power Switch When you are finished playing with this toy, slide the power...