Intercom - AT&T E5911 User Manual

TONE TONE
MUTE REDIAL MUTE
DELETE PAUSE DELETE
INTERCOM TO�
Telephone operation

Intercom

Use the intercom feature for conversation between
handsets.
1. Press INT. The screen of the originating handset
will show INTERCOM TO:.
REDIAL
PAUSE
2. Enter the handset number of the destination hand-
set. The display will show CALLING HANDSET X.
The destination handset will ring, and its screen
will show HANDSET X IS CALLING.
• Before the intercom call is answered, you can cancel the inter- Before the intercom call is answered, you can cancel the inter-
com call by pressing
• If the destination handset is not answered within 100 seconds If the destination handset is not answered within 100 seconds
or if it is in the directory or call log mode, or out of range, the
originating handset will show the message UNABLE TO CALL
TRY AGAIN.
3. On the ringing destination handset, press
dial pad key (0-9, * or #) to answer the
intercom call.
To end the intercom call:
• Press
-OR-
• Place either handset in the charger or telephone
base.
NOTES:
PHONE
/FLASH
NOTE: Pressing OFF/
silence the intercom ringer.
OFF
/CLEAR
16
OFF/CLEAR or INT.
, INT, SPEAKER, or any
or MUTE will temporarily
CLEAR
or INT on either handset.