Ec-Declaration Of Conformity - Jonsered GR 2026 L Operator's Manual

Approved accessories
Centre hole in blades/cutters, Ø 25,4 mm
Blade shaft thread M10
Plastic blades
Trimmer head
Edger (CL)
Hedge trimmer (CL)

EC-declaration of conformity

(Applies to Europe only)
We, Jonsered, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declare that the clearing saws Jonsered GR2026L/CL and
GR2032L with serial numbers dating from 2002 onwards (the year is clearly stated on the rating plate, followed by the serial
number), comply with the requirements of the COUNCIL'S DIRECTIVE:
- of June 22, 1998 "relating to machinery" 98/37/EC, annex IIA.
- of May 3, 1989 "relating to electromagnetic compatibility" 89/336/EEC, and applicable supplements.
- of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC. Conformity assessment according to Annex V.
For information relating to noise emissions, see the chapter Technical data.
The following standards have been applied: EN292-2, CISPR 12:1997, EN ISO 11806.
SMP Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has carried out voluntary type approval for
Husqvarna AB. The certificates have the numbers: SEC/97/419, 01/164/007 - GR2026L/CL, SEC/98/572, 01/164/008 - GR2032L
Huskvarna January 3, 2002
Bo Andréasson, Development manager
24 –
English
TECHNICAL DATA
Type
Polytrim Ø 300
Tap-N-Go 35
Auto32
S35
Edger attachment Ø 200 mm
Hedge trimmer attachment
Cutting attachment guard, Art. no.
503 74 50-03
503 74 50-03
503 74 50-03
503 74 50-03
-
-