Table of Contents
Advertisement
Model GC2128C (M10 LH arbor shaft thread) - - Centre hole in blades/cutters, ∅ 25,4 mm
Approved accessories
Grass blade/grass cutter
Trimmer head
Plastic blades
Support cup
Attachments
Cultivator attachment with shaft
Edger attachment with shaft
Blower attachment with shaft
Pruner attachment with shaft
DECLARATION OF CONFORMITY
EC Declaration of Conformity (Only applies to Europe)
We, Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46- -36- -146000, as authorised
representative in the Community, declare that the grass trimmer model Jonsered GC2128C
from serial numbers 2009- -031N00001 and onwards (the year is clearly stated on the rating
plate, followed by the serial number), comply with the requirements of the COUNCIL'S
DIRECTIVES:
of 22 June 1998 "relating to machinery" 98/37/EC, annex IIA;
of 15 December 2004 "relating to electromagnetic compatibility" 2004/108/EC, and applicable
supplements; and
of 8 May 2000 "relating to the noise emissions in the environment" in accordance with Annex
V of 2000/14/EC. The measured sound power is 110 dB(A), the guaranteed sound power is
114 dB(A). The cutting width is 43 cm.
The following standards have been applied:EN12100- - 1:2003, EN 12100- - 2:2003, EN ISO
11806:1997 and CISPR 12:2005.
SMP, The Swedish Machinery Testing Institute, Fyrisborgsgatan 3 S- -754 50 Uppsala,
Sweden, has carried out voluntary type approval. The certificate(s) are numbered:
SEC/09/1291.
09- -01- -31
545186870 Rev. 2
4/30/09
TECHNICAL DATA
Type
Cutting attachment / guard, part. no.
Grass 255- -4 1 inch
504 00 13- -03 / 545 081 703
(∅ 250 4- -teeth)
T25
537 33 83- -02 / 545 081 703
Tricut 300 mm
531 00 38- -11 / 545 081 703
Fixed
- -
Part. no.
952 711 907
952 711 908
952 711 911
952 711 910
Ronnie E. Goldman, Director of Engineering
Handheld Consumer Products
English--- 25
Advertisement
Table of Contents
