Ec Declaration Of Conformity - Jonsered FC2256W Operator's Manual

Support cup
MC2256
Approved accessories
Centre hole in blades/cutters, Ø 25,4
mm
Grass blade/grass cutter
Saw blade
Trimmer head
Shredder blade
Support cup
EC Declaration of Conformity (Applies to Europe only)
We, Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declare that the brush cutters Jonsered BC
2256, MC 2256, FC 2256 and FC 2256 W with serial numbers dating from 2013 onwards (the year is clearly stated on
the rating plate, followed by the serial number), comply with the requirements of the COUNCIL'S DIRECTIVE:
- of May 17, 2006 "relating to machinery" 2006/42/EC.
- of December 15, 2004 "relating to electromagnetic compatibility" 2004/108/EC.
- of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC. Conformity assessment according
to Annex V. For information relating to noise emissions, see the Technical data chapter.
The following standards have been applied: EN ISO 12100:2010, EN ISO 11806-1:2011, ISO 14982:1998, CISPR
12:2007
SMP Svensk Maskinprovning AB, Box 7035, SE-750 07 Uppsala, Sweden, has performed voluntary type examination
on behalf of Husqvarna AB. The certificates are numbered: SEC/09/2192 - FC 2256, FC 2256 W, SEC/09/2191 - BC
2256, MC2256
SMP Svensk Maskinprovning AB has also verified agreement with appendix V of the council's directive 2000/14/EG. The
certificates have the numbers: 01/164/063 - FC 2256, FC 2256 W, 01/164/060, 01/164/064 - BC 2256, MC2256
Huskvarna, 21 December 2013
Per Gustafsson, Development manager (Authorized representative for Husqvarna AB and responsible for technical
documentation.)
TECHNICAL DATA
Fixed
With ball bearing
Type
Output shaft thread M12
Multi 275-4 (Ø 275 4 teeth)
Multi 300-3 (Ø 300 3 teeth)
Multi 350-3 (Ø 350 3 teeth)
Maxi 225-24 (Ø 225 24 teeth)
Scarlet 200-22 (Ø 200 22 teeth)
Scarlet 225-24 (Ø 225 24 teeth)
Trimmy S II (Ø 2.4 - 3.3 mm cord)
Tap-N-Go 45 Spin (Ø 2.7 - 3.3 mm
cord)
Tap-N-Go 55 Spin (Ø 2.7 - 3.3 mm
cord)
F55 (Ø 2.7 - 3.5 mm cord)
-
Fixed
With ball bearing
Cutting attachment guard, Art. no.
544 16 03-02
544 16 03-02
544 16 03-02
544 01 65-01
537 21 71-01
544 01 65-01
544 10 74-04
544 10 74-04
544 10 74-04
544 10 74-04
544 02 65-03
English – 38