Nikon VAA35001 Coolpix S1 Repair Manual page 6

DISASSEMBLY
・ Lead-free solder is used for this product.
・ For soldering work, the special solder and soldering iron are required.
・ Do NOT mix up lead-free solder with traditional solder.
・ Use the special soldering iron respectively for lead-free solder and lead solder. They cannot
be used in common.
Note : ① Before disassembling, remove the SD card and the charged battery.
② When disassembling, make sure to memorize the processing state of wires, screws to be
③ Because electrical parts are easily damaged by static electricity, make sure that you are
�
�����������������������������������������������������������������������
��������������������������
������������������������������������������������������������������
�������������������������������������������������
Points to notice for Lead-free solder products
fixed and their types, etc.
well earthed/grounded.
�������
- D1･ S1 -
VAA35001-R.3666.A