Nikon VAA35001 Coolpix S1 Repair Manual page 22

SPEAKER/MICROPHONE
・ Solder the FPC onto the speaker [#218]. (Fig. 1)
・ Adhere the spacer [#219].
・ Set the speaker [#218].
・ Solder the lead wires [red] and [black] onto the FPC. (Fig. 2)
・ Adhere the spacer [#222].
・ Set the microphone [#221].
・ Adhere the spacer [#220].
・ Arrange the lead wires [red] and [black] as shown below. (Fig. 1)
・ Fold the FPC as shown below. (Fig. 1)
・ Adhere the spacer [#217].
・ Set the speaker holder [#216].
・ Tighten the screw [#104].
Lead wire [black]
（Fig.2）
Spacer [#222]
Microphone [#221]
Spacer [#220]
Screw [#104]
Lead wire [red]
- A4･ S1 -
Spacer [#219]
Speaker [#218]
Spacer [#217]
Speaker holder [#216]
Remove 2 screws and, while the FPC is being
raised, make soldering.
（Fig.1）
VAA35001-R.3666.A
Solder
Speaker [#218]