Nikon VAA35001 Coolpix S1 Repair Manual page 35

4. Initial image data writing and Firmware updating
Write the data of initial images, and go on to update the firmware.
Device
・ AC adapter (EH-63)
・ Updating SD card × 1
[How to create an updating SD card]
1) Format SD card on PC.
2) Create a folder named "firmware" in the root directory of the SD card.
3) Copy "firmware.bin" into the created folder.
4) Copy "nanddat.bin" into the root directory of the same SD card.
Note) When only firmware updating is performed without replacing CP-1 PCB, copying "nanddat.bin" into the SD
card is NOT necessary.
Procedure
・ Turn the camera OFF and connect the AC adapter.
・ Insert the updating SD card into camera.
・ Turn on the power of the camera.
・ Press the [MENU] button and set up the Shooting menu.
・ Highlight and select "Firmware version". The menu for initial image data writing appears. (Fig. 1)
・ Select "Yes", and press the decision button to carry out data-writing of initial images. (Fig.2)
Note: Do NOT turn power OFF during updating.
(Fig.1)
(Fig.2)
- A17 ･ S1 -
VAA35001-R.3666.A