Nikon VAA35001 Coolpix S1 Repair Manual page 28

FRONT COVER
・ Fit the multi-connector terminal at the bottom of the
main PCB unit CP-1 [#225] into the front cover [#201].
Then, assemble the main PCB unit CP-1 [#225] into the
front cover [#201] together with the lens unit.
※ Set the main PCB unit CP-1 [#225] and the lens unit
while lifting the FPC that is connected with the barrier
motor unit [#206].
・ Set the FPC at 2 places.
Front cover [#201]
Lens unit
FPC connected with the barrier motor unit [#206]
・ Adhere the spacer [#229].
FPC
Spacer [#229]
- A10 ･ S1 -
PLACE WHICH MUST NOT BE HELD IN LENS UNIT
＜LENSの触れてはいけない箇所＞
Motor unit
モータ部
G1 ~ Prism unit
G1～プリズム部
Main PCB unit CP-1 [#225]
VAA35001-R.3666.A
Shutter connector unit
シャッタコネクタ部
Rear sheet
PI unit
ＰＩ部 背面シート
Multi-connector terminal
at the bottom of the main
PCB unit CP-1 [#225]