VAA35001-R.3666.A
ASSEMBLY
Note: Before replacing the lens unit or the main PCB unit CP-1 [#225] with a new one, be sure to take a note of the
value, because it will be used for adjusting the lens after the assembly.
Be sure to take a note of this value.
+36 +250
040915
0001
△
△
A1
FLASH UNIT
・ Hook the flash unit [#227] to the main PCB unit CP-1 [#225] to assemble them.
・ Solder at 3 places.
Hooks on the rear of the PCB.
Hook
Flash unit [#227]
Main PCB unit CP-1 [#225]
Solder
Solder
- A1・ S1 -