Memory Channel Lockout - Kenwood RZ-1 Instruction Manual

Note:
lf either channel ¡s empty, the numeric keys will not be able
to recall the Programmable band.
4-4-5.' Memory Channel Scan
1. Press the VFO/M.ch key to select the M.ch mode.
2. Press S. SEL key to select the Scan mode.
3. Press the SCAN key to initiate SCAN. The selected Scan
mode indicator will flash OFF and ON as a visual
reminder that the receiver is scanning.
4. Press the SCAN key again or the C key to clear scann-
i n g .
4-4-6. Memory ChannelGroup Scan
1. Press the VFO/M.ch key to select the M.ch mode.
2. Press the S.SEL key to select the Scan mode.
3. Press the desired group number key using the numeric
keypad.
4. Press the SCAN key to initiate SCAN. The selected scan
mode indicator will flash OFF and ON as a visual
reminder that the receiver is scanning.
5. Press the SCAN key again or the C key to clear scann-
i n g .
SCAN DIRECTION
Scan will begin in an upwards direction. You can reverse
t h e d i r e c t i o n b y r o t a t i n g t h e T u n i n g c o n t r o l
counterclockwise. or by pressing the UP/DWN keys.
4-4-7. Memory Channel Lockout
The Memory Channel Lockout function allows you to tem-
porarily skip unwanted Memory Channels during the
Memory Channel Scan mode.
1. Press the VFO/M.ch key to select the M.ch mode.
2. Select the Memory Channel that you wish to skip by us-
ing the MAIN Tuning control.
3. Press the STEP key.
A star (* ) will appear to the left of the Memory Channel
number. This indicates the Memory Channel will be skip-
ped during Memory Channel Scan operations.
I
Sroup number
Memorv Channel GrouD numbe¡
Memorv Channel
1 1 0 - 1 9
o
6 0 - 6 9
2 0 - 2 9
7 7 0 - 7 9
3
3 0 - 3 9 8 8 0 - 8 9
4
4 0 - 4 9 I 9 0 - 9 9
5 5 0 - 5 9
0 o 0 - 0 9
I t I t-
t-l ,-l ,-l ,-l
t
-i
ü.
t-t ,-t t-1. t-l MHz
SIGNAL
Í.ct
3P.T:
Fr-i
,-! 4 *
scaN -
lrmt
t l l l l
24