Table of Contents
Advertisement
3. ilrtsTAltATlotl|
lll|sTRucTl0tl|s
3.1. INSTALLATION
3-1-1. Fixed Installation
Foot installation
Attach the feet (4 pcs.) using the following procedures.
1. Place the radio so that the bottom is up.
2. Place each foot on the bottom cover so that the hole in
the feet line up with the holes in the bottom cover.
3. Insert a snap fastener into the hole of each foot.
(Make sure the pin is not inserted too far or the fastener
will not go in properly.)
4. Push the pin down securely to complete the installat¡on.
3-1-2. Mobile lnstallation
Mounting bracket
GAUTION:
When installing the receiver in a vehicle, consider ease of
operation and safety when selecting the installation loca-
tion.
Make sure that the receiver will not slip out of place while
operating the vehicle.
1. Secure the receiver under the dashboard using the sup-
plied mounting bracket. Install the bracket as shown
below.
Pin
Snap fastener
Body
Advertisement
Table of Contents
