Rf Exposure Information - Cisco 7920 Regulatory Compliance And Safety Information Manual

RF Exposure Information

The radio module has been evaluated under FCC Bulletin OET 65C (01-01)
and found to be compliant to the requirements as set forth in 47 CFR Sections
2.1091, 2.1093, and 15.247 (b) (4) addressing RF Exposure from radio
frequency devices. This model meets the applicable government
requirements for exposure to radio frequency waves.
This wireless phone contains a radio transceiver. The radio transceiver and
antenna have been designed to meet the RF emission requirements for human
exposure as specified by the FCC as well as by other agencies from other
countries. These guidelines were developed by the industry based on
guidance from the World Health Organization (WHO). These industry
standards have been developed to include additional safety margins to ensure
that the user is exposed to the least amount of RF radiation.
The radio transceiver uses a non ionization type of radiation as opposed to an
ionized radiation such as an X-Ray wave.
The exposure standard for these devices references a unit of measure known
as SAR. The limit as set by the FCC is 1.6W/kg. The tests for this emission
level is done in an independent laboratory who employs test methods and
operating positions reviewed by the FCC and other agencies.
Before the phone was placed on the market, the product was tested and
certified in accordance with the FCC regulations to verify that the product did
not exceed the FCC SAR requirements.
60
OL-xxxxx-xx