Ce Marking; National Restrictions - Cisco 7920 Regulatory Compliance And Safety Information Manual

CE Marking

For the Cisco Unified Wireless IP Phone 7920 Series, the following CE mark
and class-2 identifier are affixed to the equipment and packaging:

National Restrictions

In the majority of the EU and other European Countries, the 2.4- and 5-GHz
bands have been made available for the use of wireless LANs.
provides an overview of the regulatory requirements in general applicable for
the 2.4- and 5-GHz bands.
The regulatory limits for maximum output power are specified in
Note
eirp. The eirp level of a device can be calculated by adding the gain
of the antenna used (specified in dBi) to the output power available
at the connector (specified in dBm).
Later in this section you will find an overview of countries in which
additional restrictions or requirements or both are applicable.
52
Table 1
OL-xxxxx-xx