Placing The Monitor With Stand - Bose VIDEOWAVE II Setup Manual

English Tab 2, 10
Here is what you need from Box 1:
Monitor AC power cord
Anti-tip straps
*Not rated for in-wall use. In-wall monitor cables are available from
Bose or a Bose authorized dealer.
®
You also need the stand, screws, and wrench:
Hex wrench Stand screws (2)
Monitor stand
Tab 3, 11 Tab4, 12
Monitor cable*
Anti-tip strap
screws (2)
Tab 6, 14 Tab 5, 13

Placing the monitor with stand

Before you place the monitor, you must attach the stand.
1. Unpack the stand, screws, and monitor.
2. Lower the monitor onto the stand, carefully lining
up the holes in the bottom of the monitor with the
supports on the stand.
WARNING: The monitor weighs about 119 lbs.
(54 kg). To prevent personal injury, a two-person lift
is required.
Monitor
support
Tab 7, 15 Tab 8,16
P S
HYSICAL ETUP
Monitor
support
9