Bose VIDEOWAVE II Setup Manual page 4

Tab 8, 16 Tab 7, 15
S I
AFETY NFORMATION
Notice
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, you are encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a different circuit than
the one to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
These devices comply with FCC and Industry Canada RF
radiation exposure limits set forth for general population. They
must not be co-located or be operating in conjunction with any
other antennas or transmitters. Both the console and remote
control contain 2.4 GHz intentional radiators.
These devices comply with Industry Canada licence-exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) These devices may not cause interference, and (2) these
devices must accept any interference, including interference that
may cause undesired operation of the device.
Remote control output power: 2.3 mW @ 2.4 GHz
Console output power: 1.5 mW @ 2.4 GHz
4
Tab 6, 14 Tab 5, 13 Tab 4, 12 Tab 3, 11
Changes or modifications not expressly approved by Bose
Corporation could void the user's authority to operate this
equipment.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that
may cause undesired operation.
The temperature range of this product is 0° C to +55° C.
Bose Corporation hereby declares that this product is in
compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC and all other
applicable EU directive requirements. The complete declaration of
conformity can be found at: www.Bose.com/compliance.
Names and Contents of Toxic or Hazardous Substances or Elements
Toxic or Hazardous Substances and Elements
Lead Mercury Cadmium Hexavalent
Part Name
(Pb) (Hg) (Cd)
PCBs X 0 0
Metal parts X 0 0
Plastic parts 0 0 0
Speakers
X 0 0
Cables X 0 0
0: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit
requirement in SJ/T 11363-2006.
X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is
above the limit requirement in SJ/T 11363-2006.
Tab 2, 10 English
Polybrominated Polybrominated
(CR(VI)) Biphenyl (PBB) diphenylether (PBDE)
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0