Bose VIDEOWAVE II Setup Manual page 16

Tab 8, 16 Tab 7, 15
P S
HYSICAL ETUP
2. Plug the free end of the monitor cable into the
connector labeled A/V OUT to Monitor on the
control console.
A/V OUT
to Monitor
16
Tab 6, 14 Tab 5, 13
Monitor
cable
Tab 4, 12 Tab 3, 11
3. Plug the power supply output cord into the control
console Power connector.
Control console
Power
Power supply
output cord
4. Plug one end of an AC power cord into the power
supply. Make sure you push the plug in as far as it
can go.
5. Plug the other end of the power cord into a live
AC (mains) power outlet.
6. Go to "Interactive setup" on page 17 and follow the
instructions to start up the system.
Tab 2, 10 English
AC power cord
Power
supply