Bose VIDEOWAVE II Setup Manual page 10

Tab 8, 16 Tab 7, 15
P S
HYSICAL ETUP
3. On the rear panel of the monitor, firmly pull out on
the bottom of the connector cover to remove it.
Connector
cover
4. Insert the screws into the holes on the back of the
monitor and tighten using the provided 5/32 in.
(4 mm) hex wrench.
10
Tab 6, 14 Tab 5, 13 Tab 4, 12 Tab 3, 11
5. Place the monitor on a stable, flat surface capable
of supporting the combined weight of the stand
and the monitor (150 lbs.).
6. Attach the monitor cable and AC power cord to the
monitor as shown.
Monitor
cable
AC power
cord
Tab 2, 10 English
Monitor