Begin Programmed Operation - Robertshaw 9600 User Manual

4. Press SET.
5. Press
MORN temperature.
6. Repeat Steps 2-5 for DAY, EVE, and NITE.
7. Shift COOL-OFF-HEAT switch to
HEAT position.
8. Repeat steps 2-6 to program HEAT (winter) settings.
B
NOTE:
OTH SUMMER AND WINTER PROGRAMS USE THE SAME TIME SETTINGS
Your thermostat is now programmed for summer and winter operation.
It will follow the four settings (MORN, DAY, EVE, NITE) for weekday opera-
tion and two settings (MORN and NITE) for weekend operation. Adjust the
program at any time by following the steps as outlined above.

Begin Programmed Operation

1. Place
into AUTO.
2. Place COOL-OFF-HEAT switch
into COOL or HEAT
depending on the season.
3. Press PROG/MAN button
until indicator is in PROG position.
PROG
MAN
SET PROG/MAN COOL-OFF-HEAT
or to change
AUTO–ON switch
PROG
MAN
SET PROG/MAN COOL-OFF-HEAT
PROG
MAN
SET PROG/MAN COOL-OFF-HEAT
AUTO - ON
AUTO - ON
AUTO - ON
7
SET PR
COOL-OFF-HEAT
AUTO - ON
COOL-OFF-HEAT
SUMMER
COOL-OFF-HEAT
WINTER
ET PROG/MAN
PROG
MAN
.