Chapter 2 Installing Scc-931T(P) - Samsung SCC-931T(P) User Manual

00326A SCC-931T(P)-eng 9/25/02 12:30 PM
SCC-931T(P) Part Names and Functions
Camera Operation Switches (Setup Switches)
The functions of the camera operation switches change depending on whether
the SCC-931T(P) is currently in the usual operation mode (i.e., the setup menu
is not showing on the screen) or the setup menu mode.
In the usual operation mode
- [UP/DOWN] Directional keys: The [UP] key is used as the ZOOM TELE
switch, and the [DOWN] key is used as the ZOOM WIDE switch.
- [LEFT/RIGHT] Directional keys: The [LEFT] key is used as the FOCUS NEAR
switch, and the [RIGHT] key used as the FOCUS FAR switch.
- [ENTER] key: This key is used to go into the setup menu.
In the setup menu mode
- [UP/DOWN] Directional keys: These keys are used to move the cursor up and
down.
- [LEFT/RIGHT] Directional keys: These keys are used to move the cursor left
and right, or to sequentially view the values that can be assigned in each
setup menu.
- [ENTER] key: This key is used to select a setup menu with a submenu in
order to open the submenu, and to accept the current value.
Power Input Connector and Video Output Connector (5-Pin)
These connectors are used to connect the power adapter cable and video input
cable.
RS485 Connector and Alarm Output Connector (4-Pin)
These connectors are used to connect an RS485 remote control cable and a
cable used for transmitting the ALARM signal at the time of the MOTION DET
mode.
8
Page 8
Chapter 2
Installing SCC-931T(P)
This chapter explains what to check before installing the
SCC-931T(P), how to choose an installation site, and what
precautions should be taken during installation. Now, let's
install the SCC-931T(P) and connect cables.
9