SCC-B9374 IR DAY&NIGHT VANDAL RESISTANT DOME CAMERA operating instructions imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/global/register...
Continued use in such a condition may cause fire or electric shock. 9. If this product fails to operate normally, contact the nearest service centre. Never disassemble or modify this product in any way. (SAMSUNG is not liable for problems caused by unauthorized modifications or attempted repair.) 10.
Page 3
CAUTION 1. Do not drop objects on the product or apply strong shock to it. Keep away from a location subject to excessive vibration or magnetic interference. 2. Do not install in a location subject to high temperature (over 122°F), low temperature (below 14°F), or high humidity.
important safety instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
contents FEATURES Features THINGS TO KEEP IN MIND Things to keep in mind during installation and DURING INSTALLATION AND USE DIMENSIONS & Dimensions & cable connection Auto iris lens & dip switch settings CABLE CONNECTION 3-Axis gimbal adjustments CAMERA ASSEMBLY & Camera assembly &...
features SONY 1/3” Super HAD Colour CCD • Resolution: 540TVL (Colour) , 570TVL (B/W) • Day/Night Filter Change and Vari-Focal Aspherical DC • Auto Iris 3.8~9.5mm F1.2 Lens Built-in Colour & B/W Auto Switchable by photocell and sensitivity • DIP Switch control of Day & Night time delay, Flickerless, BLC and White •...
camera assembly & mount 1. Dome Base Mounting - Remove the protecting sheet from the rubber bottom and attach it on the base housing. - Fix the base housing with the supplied 4pcs of screws(No. 8-32 UNC) on the ceiling or wall. 2.
5. Service Video Port Description troubleshooting If you have trouble operating the camera, check the following guides for the possible problem. Nothing appears on the screen. • - Check the power connection and video signal line connection. - Check the brightness level of DC Auto Iris volume of the camera. The video image is not clear. • - Check if the camera glass has dust on the surface.
specifications ITEM NTSC Image Sensor 1/3" Interline transfer type color CCD (SONY) Effective Pixels 768H × 494V (380K pixels) 752H × 582V (440K pixels) 525 Lines 2:1 Interlace 625 Lines 2:1 Interlace Scanning System Scanning Frequency 15.734KHz (H), 59.94Hz (V) 15.625KHz (H), 50Hz (V) Resolution 540TVL (Colour) , 570TVL (B/W)
Page 12
Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.