Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Samsung C6435(P)
Summary of Contents for Samsung C6435(P)
- Page 1 User’s Guide SmartDome Camera SCC-C6433(P)/C6435(P)
-
Page 2: Safety Precautions
Safety Precautions CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit. - Page 3 If this product fails to operate normally, contact the nearest service centre. Never disassemble or modify this product in any way. (SAMSUNG is not liable for problems caused by unauthorized modifications or attempted repair.) 10. When cleaning, do not spray water directly onto parts of the product.
-
Page 4: Important Safety Instructions
Important Safety Instructions Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifiers) -
Page 5: Table Of Contents
Contents Overview ... 8 About this guide ...8 Product overview ...8 Main features ...8 Components ...8 CHECKING COMPONENTS IN THE PACKAGE ...8 NAMES OF EACH PART ...9 Installation ...10 Before installation ...10 THINGS TO KEEP IN MIND DURING INSTALLATION AND USE ...10 Initial settings ...10 CAMERA ADDRESS SETUP ...10 SETTING COMMUNICATION PROTOCOL ... - Page 6 DIGITAL ZOOM ...39 DISPLAY ZOOM ...40 DISPLAY P/T ...41 EXIT ...41 Video set ... IRIS ...42 ALC ...42 SHUTTER ...45 AGC...46 MOTION ...47 WHITE BAL ...48 FOCUS MODE ...49 SPECIAL ...50 EXIT ...52 Preset ... Zone set ... PRIVACY ZONE ...55 ZONE DIR SET ...56 ZONE AREA SET ...57 Auto set ...60...
- Page 7 AUTO SET ...66 AUX OUT CONTROL ...66 Other set ...6 PROPORTIONAL P/T ...67 TURBO P/T ...67 AUTO CAL ...67 D-FLIP ...68 CAM RESET ...68 LANGUAGE ...68 PASSWORD ...69 RS-485 ...70 Clock set ...0 System info ...1 Shortcut keys ... Product Specifications ...75...
-
Page 8: Overview
Overview About this guide ❚ This user guide includes basic instructions for the product. It is recommended that all users read this guide before use. This guide is divided as follows: “Overview” introduces the user guide and product related information. “Installation”... -
Page 9: Names Of Each Part
NAMES OF EACH PART Your camera has the following components: 1. Camera Holder Adapter 2. Camera Body 3. Zoom Lens 4. Cover-dome 5. Alarm Output: N/O, COM, N/C, AO-2, AO-1, GND 6. Alarm Input (1~): AI-8, AI-7, AI-6, AI-5,GND, AI-4, AI-3, AI-2, AI-1, GND 7. -
Page 10: Installation
Installation Before installation ❚ THINGS TO KEEP IN MIND DURING INSTALLATION AND USE • Do not disassemble the camera on your own. • Always be careful when handling the camera. Do not strike the camera by your fists or shake it. -
Page 11: Setting Communication Protocol
SETTING COMMUNICATION PROTOCOL Use number 1~4 PIN of SW702 to set communication Protocol. PIN1 PIN Comp A : SAMSUNG HALF PIN PIN B : SAMSUNG FULL <Bottom View of Camera Holder> X100... -
Page 12: Baud Rate Setting
BAUD RATE SETTING Use PIN 5 and 6 of SW702. BAUD RATE 4800 BPS 9600 BPS 19200 BPS 38400 BPS The factory default setting is set to 9600BPS. PIN 5 PIN 6... -
Page 13: Setting Rs-422A/Rs-485 Termination
SETTING RS-A/RS-8 TERMINATION As it is shown in the structure map, when Controller and RS-422A/RS-485 is connected, it should be terminated according to the Cable feature of impedance on the each end of the transmitting line to transfer the signals in long distance by controlling the reflection of the signals to the lowest. - Page 14 Controller Division CAM 1 <RS-A/RS-8 Full Duplex Organization> Note A communication error may occur if you connect multiple cameras that are assigned the same address in the network. n < CAM CAM n-1 CAM n Division SW1-ON SW-ON...
-
Page 15: Adapter Cable Connection
Adapter cable connection ❚ SCC-C6 Adapter Board... -
Page 16: Cable Connection
Cable connection ❚ 1. First, connect one end of the BNC video cable connector to the Video Output Terminal (VIDEO OUT). . Then, connect the other end of the connector to the Video Input Terminal of the monitor. Video terminal on the rear of monitor BNC Cable... - Page 17 . Connect the Power Adapter to the Power Cable of the camera. . Adjust the switch on the Power Adapter to the proper voltage. Then, connect the Power Adapter's plug to the Power Connector. Power Selection Switch under the Power Adaptor Power Selection Switch under the Power Adaptor...
- Page 18 . Connect the Remote Control Terminal of the camera and the external Controller. Adapter Cable Controller...
-
Page 19: Installation Precautions
Installation precautions ❚ 1. Make sure that the installation site can sufficiently support a minimum of four times the net weight of the SCC-C6435(P)/6433(P) SmartDome camera and other accessories. 2. Install in an area where the space above the ceiling board is over 18 cm (7 in.) high. 3. Use the supplied screws to fasten the camera to the bracket assembly. - Page 20 2. WALL MOUNT ADAPTOR (SADT-104WM) This adaptor is used for installing the SmartDome camera on an indoor wall. 3. HANGING MOUNT ADAPTOR (SADT-100HM) This adaptor is used for installing the SmartDome camera to an outdoor wall or a ceiling and used with CEILING MOUNT ADAPTOR(SADT-100CM).
- Page 21 4. OUTDOOR HOUSING (SHG-222) This housing is used for installing the SmartDome camera to an outdoor wall or a ceiling. ※ To install and use OUTDOOR HOUSING, remove the Clear Dome from the Camera body before installation. ※ When installing the OUTDOOR HOUSING to an outdoor wall, use WALL MOUNT ADAPTOR (SADT-103WM) to install it.
- Page 22 5. CEILING MOUNT ADAPTOR (SADT-100CM) This adaptor is used for installing the OUTDOOR HOUSING(SHG-222) and HANGING MOUNT ADAPTOR(SADT-100HM) for the SmartDome camera to a concrete ceiling. It is also used for installing the SmartDome camera with HANGING MOUNT ADAPTOR (SADT-100HM) to an indoor wall. 6. POLE MOUNT ADAPTOR (SADT-100PM) This adaptor is used for installing the WALL MOUNT ADAPTOR (SADT-104WM/103WM) to a pole that is over 8 cm (2.76 in.) in diameter.
- Page 23 7. CORNER MOUNT ADAPTOR (SADT-110CM) This adaptor is used for installing the WALL MOUNT ADAPTOR (SADT-104WM/103WM) to the edge of wall.
-
Page 24: Installing The Camera
Installing the camera ❚ 1. Install the structure on the ceiling. (Refer to Installation reference for the Length of the structure) * Built in by the builder of the structure 2. Make a hole in the ceiling where the camera will be installed. (The hole should be about ø185) - Page 25 . Assemble the BRACKET-CEILING on the ceiling and screw the 4 bolts in. . Connect the various cables to the CAMERA ADAPTER. Video terminal on the rear of monitor BNC Cable BRACKET-CEILING Power Selection Switch under the Power Adaptor Power Selection Switch under the Power Adaptor...
- Page 26 5. Match the BRACKET-CEILING and CAMERA ADAPTER and use 4screws (PH M4 x 8) to assemble them. 6. Pull the safety wire from the case body, and assembly it to the camera holder. DOME BRACKET-CELING ASSY-HOLDER CAMERA SAFETY WIRE SCREW(TH M3XL13.8)
- Page 27 . Match the 3 holes on the back of the CAMERA and the CONNECTOR and turn it right about 10 degrees. (Check the sound of LOCKING) * Use the screws (TH M3XL13.8) to connect the CAMERA and the ADAPTER so they don't move.
-
Page 28: Camera Setup
Camera Setup CAMERA SET ... CAMERA ID V-SYNC DAY/NIGHT MOTION DET ZOOM SPEED DIGITAL ZOOM DISPLAY ZOOM DISPLAY P/T EXIT VIDEO SET... IRIS SHUTTER MOTION WHITE BAL FOCUS MODE SPECIAL EXIT Note *SCC-C6433(P) does not support for WDR function. OFF/ON... INT/LINE.. - Page 29 PRESET PRESET MAP ZONE SET... PRIVACY ZONE ZONE DIR SET ZONE AREA SET EXIT AUTO SET... AUTO PAN PATTERN SCAN AUTO PLAY ALARM SET... ALARM PRIORITY SET... ALARM IN SET... ALARM OUT SET... AUTO SET... 0~127 OFF/ON... OFF/ON... OFF/ON... QUIT/SAVE 1/2/3/4 1/2/3 1/2/3/4...
- Page 30 AUX OUT CONTROL... OTHER SET... PROPORTIONAL P/T TURBO P/T AUTO CAL. D-FLIP CAM RESET LANGUAGE* PASSWORD RS-485 EXIT CLOCK SET... DISPLAY TIME FORMAT SET TIME DATE FORMAT SET DATE EXIT SYSTEM INFO... Note *Selectable languages may vary depending on sales region. OUT1 OFF/ON OUT2...
- Page 31 Note - If the power is turned off after PRESET, AUTO PAN, SCAN, PATTERN function is activated and no other control is made, camera will do the same function after the power is turned on. - When tilt position is over 90° and menu-on command is received, pan will automatically rotate 180° and tilt will be move to the corresponding position.
-
Page 32: Camera Set
Camera setup ❚ CAMERA ID This CAMERA ID menu is used to assign a camera ID to this camera. If you press the Setup switch when the CAMERA ID menu is selected, the corresponding setup screen appears. (CAMERA SET) CAMERA ID ON... -
Page 33: Day/Night
(CAMERA SET) CAMERA ID V-SYNC LINE... DAY/NIGHT DAY... MOTION DET ZOOM SPEED DIGITAL ZOOM DISPLAY ZOOM DISPLAY P/T EXIT QUIT Select LINE and press Enter. You will see the LINE LOCK submenu where you can adjust the phase of the LINE LOCK. You can use the PHASE menu of the LINE LOCK submenu to assign as much PHASE as you want. - Page 34 DAY... If you press the ENTER when the DAY… submenu is selected, the corresponding screen appears. You can set the values for [C-GAIN] when the DAY… submenu is selected. You can set the values for [AGC COLOR] and [AGC DETAIL] while the AGC menu is selected. Note When the value of AGC DETAIL becomes large, it also makes the noise stand out.
- Page 35 (BW) BURST Even in night mode, you can see colour images in bright illumination. Therefore you can select any of [COLOR…] and [BW…]. In case of [COLOR…], you have to set the colour temperature for white balance. You can also specify the settings for red and blue colours on your own. In case of [BW...], the burst signals are output with the BW Composite Video signals when the BURST is set to [ON].
-
Page 36: Motion Det
For this function, you can specify the level for each conversion between Day and Night. Note When the DAY/NIGHT is set to [AUTO...], the AGC is displayed with “---“ so you cannot change its setting. MOTION DET The MOTION DET menu is used to configure the motion detection related settings. If you press the ENTER when [ON…] is selected in the MOTION DET menu, the corresponding screen appears. - Page 37 Those 3 types are like the following: 1. Window Type The selected area is displayed with a box. The motion can be detected for the area only. You can manually set the motion detection area. You can use the UP/DOWN/LEFT/RIGHT Setup switch to set the size.
- Page 38 . Block Type The screen displays with small blocks. When a motion is detected in the selected blocks, the small blocks are displayed on the screen. [PRESET] : The whole screen becomes the motion detection area. [USER...] : You can manually set the motion detection area. Use the UP/DOWN/LEFT/RIGHT, ENTER to set the area.
-
Page 39: Zoom Speed
ZOOM SPEED In the ZOOM SPEED, menu you can select the speed of the ZOOM Key (Tele/Wide). (CAMERA SET) CAMERA ID V-SYNC DAY/NIGHT MOTION DET ZOOM SPEED DIGITAL ZOOM DISPLAY ZOOM DISPLAY P/T EXIT Use the Left/Right key in the ZOOM SPEED menu to select the speed. 1: Slowest speed 2: Low speed 3: High speed... -
Page 40: Display Zoom
(CAMERA SET) CAMERA ID V-SYNC DAY/NIGHT DAY... MOTION DET ZOOM SPEED DIGITAL ZOOM DISPLAY ZOOM DISPLAY P/T EXIT QUIT DISPLAY ZOOM In DISPLAY ZOOM, you can display the ZOOM scale on the screen. (CAMERA SET) CAMERA ID V-SYNC DAY/NIGHT DAY... MOTION DET ZOOM SPEED DIGITAL ZOOM... -
Page 41: Display P/T
DISPLAY P/T In DISPLAY P/T, you can display the position of Pan/Tilt on the screen. (CAMERA SET) CAMERA ID V-SYNC DAY/NIGHT DAY... MOTION DET ZOOM SPEED DIGITAL ZOOM DISPLAY ZOOM DISPLAY P/T EXIT QUIT Note - If no change on the Pan/Tilt position is made for 3 seconds, the information window will disappear. - It allows an error range of ±... -
Page 42: Video Set
Video set ❚ IRIS There is a function to automatically adjust IRIS to the incoming light level. Owing to this function, you may set up the brightness level yourself. The ALC(Auto Light Control) menu allows you for video output level setup. The WDR(Wide Dynamic Range) menu allows you for setting up the level of WDR. - Page 43 (ALC) BOTTOM... ( 0) - - - - I - - - - LEVEL For items in the BLC menu, the user can set the area and location of the BLC area by pressing ENTER key after put the cursor on [USER…] using the Left, Right key. For AREA items, you can use the Up, Down, Left, Right key to designate the AREA, and then press the ENTER key.
- Page 44 (BLC) <SIZE> <LOCATION>... Use Left, Right key in the LEVEL menu to control the video output level (brightness). MANU When you press the ENTER key after selecting MANU in the IRIS item, an additional screen appears in which you can set manually opening or closing the IRIS. (VIDEO SET) IRIS MANU...
-
Page 45: Shutter
The WDR camera is a state-of-art technology to expand the screen profit, mostly effective when you photograph both indoor and outdoor. In short, this function provides you with the distinct reproduction of not only the indoor but also the outdoor. Press the ENTER to set up the WDR level. -
Page 46: Agc
Keep pressing both Left and Right in the SHUTTER menu, the speed will change in the following sequence. OFF → AUTO X2 → AUTO X4 → AUTO X6 → AUTO X8 → AUTO X12 → AUTOX16 → AUTO X24 → AUTO X32 → AUTO X48 → AUTO X64 → AUTO X96 → AUTO X128 → AUTO X256 → OFF →... -
Page 47: Motion
Note When the COLOR/BW menu of the camera set is set to [AUTO...], AGC will be displayed as “---“. You can’t adjust the settings manually. MOTION The MOTION function is available only when the SHUTTER menu is set to Slow Shutter AUTO, being composed of 5 steps, [S.SLOW], [SLOW], [NORM], [FAST], [F.FAST]. -
Page 48: White Bal
WHITE BAL Lights are generally denoted as colour temperatures and expressed in Kelvin (K) units. The general light colour temperatures are shown below. 10000K 9000K 8000K 7000K 6000K 5000K 4000K 3000K 2000K 1000K You can select one of four modes for white balance adjustment as follows: - ATW1/ATW2(Auto-Tracing White Balance Mode): In these modes, the colour temperature is monitored continuously and thereby white balance is set automatically. -
Page 49: Focus Mode
- MANU : If WHITE BAL menu is set to MANU mode, the user can set the white Balance considering the current illumination. Select MANU menu and press the ENTER, the sub screen where you can select Manual White Balance will be shown. Use the left/right keys to select 3200K, 5600K or OFF(USER) mode in the PRESET menu. -
Page 50: Special
Note ※ AF function may not possible with types of objects listed below. For such objects, focus manually. - High intensity objects or objects illuminated with low lighting - Objects shot through wet or dirty glass - Pictures that are a mixture of distant and nearby objects - White walls and other single-colour objects - Venetian blinds and other horizontally striped objects SPECIAL... - Page 51 DNR(Digital Noise Reduction) function enables the picture to be reduced noise. (SPECIAL) FLICKERLESS REVERSE DETAIL Y-LEVEL C-LEVEL POSI/NEGA FLICKERLESS When this is set to [ON], the shutter speed is set to 1/100 sec (for NTSC) or 1/120 sec (for PAL) to prevent from flickering by the discordance between vertical synchronization frequency and on-and-off frequency of the light.
-
Page 52: Exit
C-LEVEL It is used to set the levels for the Burst signal and the entire colour signal of the video signal. POSI/NEGA It is used to output as it is, or mirror the video brightness signal. EXIT The EXIT menu is used to return to the MAIN menu. - QUIT : Ignores the changed information and restores the saved information. -
Page 53: Preset
Preset ❚ This is the menu that user sets the PAN/TILT location, Zoom/Focus, and screen condition, so the camera can monitor the presetting area on demand. A total of 128 presets are available. ** MAIN MENU ** CAMERA SET... VIDEO SET... PRESET... - Page 54 POSITION SET From “POSITION SET...” press the ENTER key to get into the PAN/TILT, FOCUS/ZOOM SET screen to set the PAN/TILT location and FOCUS/ZOOM condition then press the ENTER key to return to a upper menu. PRESET ID This is the ID set up function for each PRESET. It can be set up to 12 characters using the left, right, up, and down keys.
-
Page 55: Preset
Zone set ❚ ■ The ZONE SET menu includes the setup of PRIVACY ZONE, ZONE DIR SET, and ZONE AREA SET. ** MAIN MENU ** CAMERA SET... VIDEO SET... PRESET... ZONE SET... AUTO SET... ALARM SET... OTHER SET... CLOCK SET... SYSTEM INFO... -
Page 56: Zone Dir Set
Note ※ For the safer privacy protection, select about 10 % more than the actual area to hide when you set up the PRIVACY ZONE area. ※ The mosaic of the recorded images is set to be the PRIVACY ZONE. The mosaic of the recorded images can not be recovered after recording. -
Page 57: Zone Area Set
ZONE AREA SET Press the ENTER key to enter the ZONE AREA MAP screen from “ZONE AREA SET...”. Select a ZONE AREA number from the ZONE AREA MAP screen and press the ENTER key to enter the ZONE AREA setup screen. (ZONE SET) PRIVACY ZONE ZONE DIR SET... - Page 58 LOCATION The [LOCATION...] menu designates the left/right LIMIT positions of ZONE AREA. Enter the setup screen to move PAN, then select a start position and press the ENTER key. Move PAN again to select an end position and press the ENTER key. Now, ZONE AREA setup is complete. ZONE AREA SET0 LOCATION ZONE ID SET...
- Page 59 ZONE ID SET This function is used to allocate as many as 12 IDs to each zone area. Use Left/Right/ UP/DOWN for this purpose. You may select the ID position from the additional menu of [LOCATION...]. ZONE AREA SET0 LOCATION ZONE ID SET ZONE ENABLE EXIT...
-
Page 60: Auto Set
Auto set ❚ The AUTO SET menu includes AUTO PAN, PATTERN, and SCAN and it is able to set up the AUTO PLAY motion. AUTO PAN After selecting the locations of two points (PAN/TILT) of START and END, it loops continuously in the set up SPEED. - Page 61 POSITION SET The menu [POSITION SET …] sets the Start / End position of AUTO PAN. Return to the settings screen and set the desired START position for PAN/TILT, and then press the ENTER key. And, set the END position for the PAN/TILT. Press the ENTER key to finish the setup for AUTO PAN Start/End positions.
-
Page 62: Pattern
PATTERN This is a replay function so that the MANUAL functions such as PAN, TILT, ZOOM, and FOCUS are played for 2 minutes. Note - When the PATTERN is saved/executed, the PAN/TILT is operated with PROPORTIONAL ON, TURBO OFF. - If the SSC-1000 or SSC-2000 is used when uploading/downloading the menu setup, reset the PATTERN because it may be different with the first setting. -
Page 63: Scan
PATTERN can be set up to 3. Choose 1, 2, or 3 with the Left/Right key in the [PATTERN SET] and press the ENTER key to get into the PATTERN set up screen. From the moment “PATTERN SET 1” is gone for 2 minutes, it memorizes the MANUAL movements and after 2 minutes, it will return to a upper menu. -
Page 64: Auto Play
AUTO PLAY If you press the ENTER switch when the [1…] submenu is selected, the corresponding screen appears. (AUTO SET) AUTO PAN PATTERN SCAN AUTO PLAY 1... QUIT AUTO RETURN This menu sets up the time during which AUTO PLAY repeats. AUTO PLAY This function sets up the motion which will be repeatedly performed by the camera whenever the time set by AUTO RETURN elapses. -
Page 65: Alarm Set
If you press the ENTER switch when the [2…] submenu is selected, the corresponding screen appears. (AUTO SET) AUTO PAN PATTERN SCAN AUTO PLAY 2... QUIT Set the start/end time and select PRESET, PATTERN, AUTO PAN or SCAN to set up. Preset function will be in action according to the start time. -
Page 66: Alarm Priority Set
ALARM PRIORITY SET This sets the priority of the 8 ALARM inputs so ALARM can work corresponding to the priority. The priority of the DEFAULT is ALARM1, ALARM2, ALARM3, ALARM4, ALARM5, ALARM6, ALARM7, ALARM8. If the ALARM is working at the same time and the priority is the same, it will operate according to the DEFAULT priority. -
Page 67: Other Set
Other set ❚ ** MAIN MENU ** CAMERA SET... VIDEO SET... PRESET... ZONE SET... AUTO SET... ALARM SET... OTHER SET... CLOCK SET... SYSTEM INFO... PROPORTIONAL P/T This function controls the PAN/TILT speed to the ZOOM magnification ratio during the manual operation of PAN/TILT. -
Page 68: D-Flip
D-FLIP When D-FLIP is off, TILT movement ranges from 0° to 90°. When D-FLIP is on, TILT movement ranges from 0° to 180°. When D-FLIP is on, images mirror vertically and horizontally in the area beyond TILT 90°. CAM RESET CAM RESET clears all the settings made so far and restores the factory default settings. -
Page 69: Password
PASSWORD This function selects or cancels the MENU setup password. Press the ENTER key at the state of PASSWORD ON, and the following screen will appear for password setup. (OTHER SET) PROPORTIONAL P/T OFF TURBO P/T AUTO CAL. D-FLIP CAM RESET LANGUAGE ENGLISH PASSWORD... -
Page 70: Rs-485
TIME FORMAT : Supports 2 type of formats: 24 Hours and 12 Hours (AM/PM). SET TIME : Sets the time. DATE FORMAT : Supports 3 types of formats: YYYY/MM/DD, DD/MM/YYYY, and MM/DD/YYYY. SET DATE : Sets the date. (RS-485) PRIORITY PROTOCOL SAMSUNG HALF BAUD RATE 9600 ADDRESS 24HOUR 00:04:00... -
Page 71: System Info
SYSTEM INFO... * ALARM, MOTOR, CAMERA and EEPROM VER. may change without notice. (SYSTEM INFO) ALARM VER. 1.000 MOTOR VER. 1.000 CAMERA VER. 1.000 EEPROM VER. 1.000 PROTOCOL SAMSUNG COMM. TYPE RS-485, HALF BAUD RATE 9600 ADDRESS SERIAL NO. 000000000000000... -
Page 72: Shortcut Keys
Shortcut keys ❚ SSC-1000 or SSC-2000 Controller supports the following short keys. Function CAMERA SET… DAY/NIGHT - DAY DAY/NIGHT - NIGHT DAY/NIGHT - AUTO VIDEO SET… IRIS - WDR IRIS - ALC FOCUS MODE - ONEAF FOUCS MODE - MF FOUCS MODE - AF ALARM SET…... - Page 73 Function AUTO RETURN *1) AUTO Calibration CAM RESET Other keys than AUTO CAL. and AUTO RETURN, upon execution, shall be applied to the MENU setup process. *1) The use of AUTO RETURN will be available only when the function equivalent to AUTO PLAY, a sub menu of AUTO SET has been built in.
- Page 74 SCC-6435 FRONT BACK...
-
Page 75: Product Specifications
Product Specifications Item Product Type Zoom lens single body WDR SmartDome CAMERA SCC-C6433/C6435 : AC 24V ± 10% (60Hz ± 0.3Hz) Power Input SCC-C6433P/C6435P : AC 24V ± 10% (50Hz ± 0.3Hz) SCC-C6433(P) : 19W Power Consumption SCC-C6435(P) : 20W SCC-C6433(5) : NTSC STANDARD COLOUR SYSTEM Broadcasting Type SCC-C6433(5)P : PAL STANDARD COLOUR SYSTEM... - Page 76 Item Min. Scene illumination Signal Output Lens PAN Function TILT Function REMOTE CONTROL ALARM Details Condition SCC-C6433(P) Sens-up Colour Illumination 50IRE 30IRE 15IRE 50IRE x256 0.008 30IRE x256 0.005 15IRE x256 0.002 SCC-C6433/C6433P : N/A SCC-C6435 : x128 SCC-C6435P : x160 COMPOSITE VIDEO OUT : 1.0 Vp-p 75 ohms/BNC One body;...
- Page 77 Item Operation Temperature -10°C ~ +50°C Operation Humidity ~90% DOME : 147.65(ø), SIZE Outline : 177(ø) x 194.3(H) NET : 2,544g Weight GROSS : 3,545g Lives of Main Parts - Slip-ring: Rotated 10,000,000 times Details...
- Page 78 Memo...
- Page 79 Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.