Changing The Factory Setting Of A Function Button - Sony STR-DB1070 Operating Instructions Manual

If the factory settings of the FUNCTION
buttons do not match your system components,
you can change them. For example, if you have
an MD player and a tape deck and you do not
have a CD player, you can assign the CD/
SACD button to your tape deck.
Note that the settings of the TUNER and FN
SHIFT functions (VIDEO 1, VIDEO 2, VIDEO
3, PHONO and MD/TAPE) button cannot be
changed.
SONI?
I
AV I/&
l/O
Function
bunons
Numeric
buttons
ENTER
MASTER VOL -
Repeat the above procedure.
1
Hold down the Function button whose
function you want to change (for
example, CDBACD).
2 Press the corresponding button of the
component you want to assign to the
Function button (for example, 4 - Tape
deck).
The following buttons are assigned to select
the functions:
To onerate
Press
CD Dlaver 1
DAT deck
MD deck
2
3
TaDe deck A
4
Taoe deck B
5
LD
player 6
VCR (command mode
VTR
1 *) I
VCR (command mode VTR 2*1 8
VCR (command mode VTR 3*)
9
TV 0
DSS (Digital Satellite Receiver) >lO
DVD ENTER
VCD
player I44
* Sony VCRs are operated with a VTR 1.2 or 3
setting. These correspond to Beta, 8mm and
VHS respectively.
Now you can use the CDBACD button to
control the tape deck.
To reset a button to its factory
setting
To reset all the function buttons to
their factory setting
Press I/&, AV I/6 and MASTER VOL - at
the same time.
66