Sony STR-DB1070 Operating Instructions Manual page 74

q
Cursor buttons (A/V/</>), ENTEW
EXEC button
After pressing the MAIN MENU, AV
MENU, or TITLE/GUIDE button, use the
cursor buttons to make specific settings,
then press the ENTEFUEXEC button to
enter the selection.
q
TITLE/GUIDE button*
Press to display DVD titles or guide menus.
•j AV DISPLAY button
Press to select the information displayed on
the TV screen.
q
Operation buttons*
The following table describes the
component operated by each button and the
function of the buttons. See the table on
page 10 for information on the buttons that
you can use to control each component.
Button(s) Function
l44/b+l
Skips tracks.
U/H
Fast forwards or rewinds.
Searches tracks in the forward or
backward direction.
4
Starts play on the reverse side of
the cassette.
b
Starts play. (Starts play on the
front side of the cassette.)
II
n
Pauses play or recording or starts
recording when the component is
in recording standby.
Stops play.
q
SHIFT I >lO button*
If
you
selected
tuner:
Press repeatedly to select a memory page
for presetting radio stations or tuning to
preset stations.
If you selected VCR, TV, LD player, tape
deck, MD deck, or CD player:
Press before inputting a channel or track
number of eleven or higher.
q
CLEAR I -I- I D.TUNING button*
If you selected DVD player:
Press if you made a mistake when you press
the numeric buttons.
If you selected TV or VCR:
Press to select the channel entry mode,
either one or two digit.
q
SEARCH MODE button
Press to select the search mode of DVD
player.
q
Indicator*
Lights up whenever any button on the
remote is pressed.
kj USE MODE button
Use to program the remote.
* The function of these buttons switch automatically
each time you press the function buttons (0). The
above explanation is intended to serve as an
example only. Therefore, depending on the
component, the above operation may not be
possible or may operate differently than described.
continued