System expansions
Removing the PCI board
PCIboard
► Open the casing (see
► Loosen the screw (1).
► Remove the PCI board from the riser card (2).
You must reinstall the rear slot cover plate due to cooling, fire protection and the EMC
regulations (regulations on electromagnetic compatibility) to be complied with.
► Now reinstall the rear slot cover plate by inserting it in the installation slot from
the inside and securing it with the screw (1).
► Close the casing (see
22 - English
"Opening the casing", Page
"Closing the casing", Page
16).
2
1
17).
A26361-K528-Z221-1-7419, edition 3