Connecting External Devices To The Usb Ports; Connecting Microphone, Headphones And Line-Out Devices; Connecting The Mains Adapter - Fujitsu FUTRO S550 Operating Manual

Getting started

Connecting external devices to the USB ports

Devices, Externaldevices, USBport, USBdevices,
You can connect a wide range of external devices to the USB ports (e.g.
printer, scanner, modem or keyboard).
USB devices are hot-pluggable. This means you can connect and disconnect
USB cables while your device is switched on.
Additional information can be found in the documentation for the USB devices.
► Connect the data cable to the external device.
► Connect the data cable to one of the USB ports on your device.
Device drivers
The external USB devices you connect to the USB ports usually require no
driver of their own, as the required software is already included in the operating
system. However, if the external USB device requires its own software, please
install it from the data carrier provided with the USB device.
To ensure USB 2.0, the length of the cable used between the front USB port of
your device and the external USB device must not exceed 3 m.

Connecting microphone, headphones and line-out devices

Microphone Line-outdevices Headphones
► Connect the microphone to the microphone port.
► Connect the headphones to the headphones port.
► Connect line-out devices to the audio output.
► Connect the external line-in devices to the audio input.

Connecting the mains adapter

Mainsadapter
► Connect the mains adapter cable to the device.
► Connect the power cable to the mains adapter.
► Plug the power cable into a grounded mains outlet.
12 - English A26361-K528-Z221-1-7419, edition 3