Operation; Switch The Device On; Switching Off The Device; Open Bios Setup - Fujitsu FUTRO S550 Operating Manual

Operation

Switch the device on

► If necessary, switch the monitor on (see the operating manual for the monitor).
Monitor, Device,
► Switch on the device using the main power switch located on the rear of the device (if present).
► Press the ON/OFF switch on the front of the device.
The power-on indicator lights green and the device is started.

Switching off the device

► Shut down the operating system in a defined manner. In Windows: via the
Start menu and the Turn Off Computer function.
Device, Monitor,
► If the operating system does not automatically switch the device into energy-saving mode or
switch it off, press the ON/OFF switch. Warning, this could lead to a loss of data!
If the device is in standby, it consumes a minimum of energy.
► Switch the device off at the main switch (if present). The device no longer uses any power.
The main switch and the ON/OFF switch do not disconnect the device
from the mains voltage. To completely disconnect the mains voltage,
remove the power plug from the power socket.
► If necessary, switch the monitor off (see the operating manual for the monitor).

Open BIOS Setup

BIOS-Setup
► When the system starts, press the
BIOS Setup will be started. Select one of the tabs to access other setting options in BIOS Setup.

PXE system boot

PXEsystem boot
► Switch the device on with the ON/OFF switch.
► When starting the system, press the
The boot menu is displayed.
► Select the desired boot option.
A26361-K528-Z221-1-7419, edition 3
F2 key (several times if necessary).
F12 key several times.
Operation
English - 13