Panasonic SC-BTT560 Operating Instructions Manual page 51

H or F
(" " stands for a number.)
Check and correct the speaker cable
connections.
There is something unusual.
Check the unit using the troubleshooting
guide. If the service number remains
displayed, do the following.
1 Disconnect the plug from the household
mains socket, wait a few seconds, then
reconnect it.
2 Press [Í/I] to turn the unit on.
If the service number remains displayed despite
doing the above, request service from the dealer.
Inform the dealer of the service number when
requesting service.
IPOD OVER CURRENT ERROR
The iPod/iPhone is drawing too much power.
Remove the iPod/iPhone, and turn the unit off
and on again.
START
The system is being restarted during the
firmware update. Please do not turn off the unit.
UPD /
(" " stands for a number.)
The firmware is being updated. Please do not
turn off the unit.
FINISH
The firmware update is complete.
NOT CONDITIONAL
The requested operation cannot be
conducted.
SET OK
The stations are set, and the radio tunes to
the last preset station.
ERROR
Automatic presetting is unsuccessful. Preset
the stations manually.
TUNED/STEREO
Stereo broadcasting or stereo sound is
selected.
TUNED
Monaural broadcasting or monaural sound is
selected.
51
VQT4Q16