Table of Contents
Advertisement
[BTT560] [BTT460] Front speaker
Attach to a wall without the base and the stand.
D 45 mm E 22 mm F 330 mm
≥ Reattaching the speaker cable to the stand
Straighten the
cable and run
through the stand.
Pull out the cable
through the hole.
[BTT500] Front speaker
G 45 mm H 25 mm
[BTT560] [BTT500] [BTT460] Surround speaker
[BTT400] Front speaker, Surround speaker
I 40 mm J 41 mm
180 mm
To prevent tipping/falling of
the speakers
Preventing tipping
[BTT560] [BTT460] Front speaker
Preventing falling
Front speaker, Surround speaker, Centre speaker
1
Thread a string to the speaker.
≥ Use a string of less than ‰ 2.0 mm, which is
capable of supporting over 10 kg.
e.g., [BTT560] [BTT460] Front speaker
A String (not supplied)
B Rear of the speaker
2
Thread a string from the wall to the
speaker and tie tightly.
When placed on the floor
When mounted on a wall
C Screw eye (not supplied)
D Wall or pillar
E Approx.150 mm
F Approx.120 mm
45
VQT4Q16
Hide quick links:
Advertisement
Table of Contents
