Fingerprint Board - Toshiba Satellite P100 Series Maintenance Manual

Replacement Procedures
4.15 Fingerprint
The following describes for removing the cover assembly (See Figure 4-24).
Remove the Fingerprint
1. Pull out the fingerprint cable from connect CN5
2. Loose below screws from fingerprint board and take it out top case
M2.5x4.0
Installing the Fingerprint
1. Turn over top case and put fingerprint in correct location
2. Fix below screws and connect the fingerprint cable CN5
M2.5x4.0
Satellite P100 Maintenance Manual (960-Q02)
FLAT BIND screw
Figure 4-24 Removing the Fingerprint
FLAT BIND screw
x2
M2.5x4.0
x2
4-41