Toshiba Satellite P100 Series Maintenance Manual page 198

Replacement Procedures
Installing the keyboard
The following describes the procedure for installing the keyboard (See Figure 4-8 to 4-9).
1. Turn the keyboard upside down and place it on the palm rest as its face down.
Connect the keyboard flexible cable to the connector CN3200 on the system board.
2. Slide and set the speaker cover assembly and secure it with the following screw.
• M2.5×3.0B
3. Install the keyboard brace by pressing it from the topside.
Satellite P100 Maintenance Manual (960-Q02)
FLAT BIND screw x6
4-23