Toshiba Satellite P100 Series Maintenance Manual page 113

Test Program for Field.
TOSHIBA Satellite(Pro) P100 Diagnostics
Version V1.00 (C) Copyright QUANTA Corp. 2005-
[ DIAGNOSTICS MENU ]
01. DIAGNOSTIC TEST
02. RUNNING TEST
03. DISK UTILITIES
04. LOG UTILITIES
05. SYSTEM CONFIGURATION
01. SYSTEM TEST
01. SYSTEM TEST
06. OPTION
02. MEMORY TEST
99. EXIT
03. KEYBOARD TEST
04. DISPLAY TEST
05. FLOPPY DISK TEST
06. HARD DISK TEST
07. REAL TIME CLOCK TEST
Use the arrow keys to highlight the desired option and press Enter.
Go To Test
Move the highlight bar to Go To Test and press Enter to start executing the test.
Test Loop
Select NO to return the screen to the subtest menu after the test is complete.
Select YES to set the test to run continuously until it is halted by the user.
Error Stop
Select NO to keep the test running even if an error is found.
Select YES to stop the test program when an error is found and display the HALT
OPERATION screen as shown below:
[[ HALT OPERATION ]]
1: Test end
2: Continue
3: Retry
These three selections have the following functions:
1: Terminates the test program and exits to the subtest menu.
2: Continues the test from the error.
3: Restarts the test from the beginning.
Use the arrow keys to move the cursor to the desired option and press Enter.
Table 3-1 in Section 3.3 lists the function of each test on the subtest menu. Table 3-2 in
Section 3.15 lists the error codes and error status for each error.
Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual
[ TEST PARAMETER ]
01. FAN ON/OFF 01. FAN ON/OFF
01. Go To Test
01. Go To Test
02. Battery Test
02. Test Loop :
03. CPU Temperature
[ DIAGNOSTIC TEST MENU ]
03. Error Stop :
99. Exit to DIAGNOSTIC TEST MENU
09. REAL TIME CLOCK TEST
10. NPX TEST
11. HIGH RESOLUTION DISPLAY TEST
12. MULTIMEDIA TEST
13. USB TEST
14. MEMORY2 TEST
88. FDD&HDD ERROR RETRY COUNT SET
99. EXIT TO DIAGNOSTICS MENU
[ SYSTEM TEST ]
YES
NO
: :Select item
ESC :Escape
7