D Battery voltage indicator "bt"
This function contains display or non-display settings of the
voltage of the connected battery pack when the power is ON.
• The voltage of the connected battery pack is displayed for 2 sec.
after power is turned ON.
Battery voltage OFF
(default)
D Scrambler code "cd"
There are 32 codes (1 to 32) available for programming. In
order to understand each other, all transceivers in your group
must have the same scramble code.
Scrambler code 1 (default)
PUSH
Battery voltage ON
(Available for I/S version only)
PUSH
Scrambler code 32
SET MODE LIST
Function
Beep tone function
Weather alert function
Priority scan function
Scan resume timer
Auto scan function
Dual/Tri-watch function
Monitor switch action
Automatic backlighting
LCD contrast selection
Auto power save function
Self check function
Battery voltage indicator
Scrambler code**
* default setting
** Available for I/S version only
SET MODE
Indication
Switch
"bP"
OFF / ON* / US
"AL"
OFF* / ON
"Pr"
OFF* / ON
"St"
OFF* / ON
"AS"
OFF* / ON
"dt"
Dual* / Tri
"Sq"
Push* / Hold
"bL"
OFF / 1 / 2 / 3*
"LC"
1 / 2 / 3* / 4
"PS"
OFF / ON*
"SC"
OFF* / ON
"bt"
OFF* / ON
"cd"
1* / 2 /
/ 32
8
21