I Setting Tag Channels; Scan Operation; I Starting A Scan - Icom IC-M88 Instruction Manual

5

SCAN OPERATION

I Setting tag channels

For more efficient scanning, add desired channels as tag
channels or clear tag channels for unwanted channels. Non-
tag channels will be skipped during scanning. Tag channels
can be assigned to each channel group
pendently.
q Select the desired channel group
ing [CH/WX•
U/I/C/L
w Select the desired channel to set as a tag channel.
e Push both [Y] and [Z] for 1 sec. to set the displayed chan-
nel as a tag channel.
• "TAG" appears in the function display.
r To cancel the tag channel setting, push both [Y] and [Z]
for 1 sec.
• "TAG" disappears.
• Clearing all tag channels in the selected channel group
While pushing and holding both [Y] and [Z], turn power ON
to clear all tag channels in the channel group.
[Example]: Starting a normal scan.
14
(USA, INT, CAN)
(USA, INT, CAN)
] for 1 sec., if desired.
Scan starts.
Push
DUAL

I Starting a scan

Set the weather alert function, priority scan function, scan re-
sume timer and auto scan function in advance, using SET
mode. (pgs. 18, 19)
inde-
q Select the desired channel group (USA, CAN, INT) by
pushing [CH/WX•
by push-
• When the weather alert function is in use, select the desired
weather channel with [CH/WX•
w Push [SCN•
• "SCAN" blinks in the function display.
• "16" appears during priority scan.
• When a signal is received, scan pauses until the signal disap-
pears or resumes after pausing 5 sec. according to SET mode
setting. (Channel 16 is still monitored during priority scan.)
• Push [Y]/[Z] to check the scanning tag channels, to change the
scanning direction or resume the scan manually.
e To stop the scan, push [SCN•
• "SCAN" disappears.
• Pushing [PTT], [16•
Scan pauses when receiving
a signal and audio is emitted.
] for 1 sec., if desired.
U/I/C/L
] and [Y]/[Z].
U/I/C/L
] to start priority or normal scan.
DUAL
].
DUAL
] or [CH/WX• ] also stops the scan.
9 U/I/C/L
Push
DUAL
to stop the scan.