Section 3 Disassembly And Option Instructions; Disassembly Instruction - Icom IC-F3GT Service Manual

SECTION 3

3-1 DISASSEMBLY INSTRUCTION

• REMOVING THE CHASSIS PANEL
1 Unscrew 1 nut A, and remove 1 knob B.
2 Unscrew 2 screws C.
3 Take off the chassis in the direction of the arrow.
4 Unplug J6 to separate front panel and chassis.
B
A
• REMOVING THE MAIN UNIT
1 Remove the searing rubber.
2 Unsolder 4 points D, and unscrew 1 nut E.
3 Unscrew 3 screws F, and 6 screws G (silver, 2 mm) to separate the chassis and the MAIN unit.
4 Take off the MAIN unit in the direction of the arrow.
Sealing rubber
DISASSEMBLY AND OPTION INSTRUCTIONS
Chassis
Front panel
F
D
F
G
F
D
E
(nickel, 2 mm) x 2
C
J6 (Speaker connector)
(silver, 2 mm) x 6
G
Shield cover
D
MAIN unit
Chassis
3 - 1
G
Guide holes