Printer Beeps; Beeping Types; Printer Beeps When The Power Is Turned On; Paper Jam - Epson TM-P60 Technical Reference Manual

Hide thumbs Also See for TM-P60:
Table of Contents

Advertisement

3.2 Printer Beeps

3.2.1 Beeping Types

The printer beeps in some situations. The beeping patterns are as follows.
Beeping Pattern
1000 ms ON
1000 ms OFF
100 ms ON
100 ms ON
1900 ms OFF
Other patterns
Note:
For details about the status sheet, see "Status sheet printing" (page 3-4).

3.3 Printer Beeps When the Power is Turned on

When printer can't find any access points with the current wireless LAN setting, the printer
beeps to warn you. [See "Printer Beeps" (page 3-2) for the beeping pattern.] In this case, you
should change the LAN setting of this printer or your access point. For details, see "Installing
your wireless LAN" (page 2-14).

3.4 Paper Jam

When there is a paper jam, follow the procedure below.
1. Open the roll paper cover.
3-2 Troubleshooting
The beeping indicates mean
• Battery remaining amount is "L level"
or less
• The printer can't find an Access
point.
• Roll paper end
• An error has happened.
• A status sheet is printed (when you
press the FEED button)
• A radio field intensity check sheet is
printed.
(when you press the FEED button)
• A radio field intensity check sheet is
printed.
(See "Radio Field Intensity Check
Mode" (page 3-5) for details.)
• Application transmit
"beeper command"to printer.
Beeping
Switch method to
times
Enable/disable
5 times
Memory switch specify
the beeping enable/
disable
• Battery remaining
amount [Msw 8-2]
• Can't find Access
point [Msw 8-3]
• Roll paper end
[Msw 8-4]
• Error has happened
[Msw 8-5]
1 time
This beeping is always
enabled.
Until
This beeping is always
printing is
enabled.
started.
Depends
--
on the
application
Rev. D

Advertisement

Table of Contents
loading

Table of Contents