Advanced Printer Driver; Esc/Pos Command; Various Status Categories - Epson TM-P60 Technical Reference Manual

4.3.2 Advanced Printer Driver

In the Advanced Printer Driver, you have to use "Control font A." The procedure is described
below.
Note
See the user's manual of the Advanced Printer driver for detail of the utility "EPSON Control font."
1. Open the properties of printer.
2. Click the "utility" tab.
3. Click the "EPSON Control FontA" button.
4. Click the "operation" tab.
5. Edit a control font. The following table shows example definitions.
Deined Command data
1B284104003031010A
1B284104003032010A
1B284104003033010A
1B284104003034010A
1B284104003035010A
1B284104003036010A
1B284104003037010A
1B284104003038010A
1B284104003039010A
1B284104003039010A
6. When the printer receives data of the defined control font A, the printer beeps as described.

4.3.3 ESC/POS command

The beeper function is able to be operated by commands. See the "ESC/POS Application
Programming Guide" for details.

4.4 Various Status Categories

This printer is able to send various status reports to the host PC. This section describes the kind
of statuses and handling.
Status Categories
4-4 Application Development Information
Tone Description
1280Hz 1000ms beeping
4100Hz 1000ms beeping
1280Hz 200ms beeping
4100Hz 200ms beeping
1280Hz 200ms beeping -> 200ms off -> 200ms beeping
4100Hz 200ms beeping -> 200ms off -> 200ms beeping
1280Hz 500ms beeping
4100Hz 500ms beeping
1280Hz 200ms beeping -> 200ms off -> 200ms beeping ->
200ms off -> 200ms beeping
4100Hz 200ms beeping -> 200ms off -> 200ms beeping ->
200ms off -> 200ms beeping
Description
Rev. D