Setup Flow - Epson TM-P60 Technical Reference Manual

2.2 Setup Flow

You have to set up your printer to use it. And you can adjust some features by customizing
them. This section describes the setup.
The setup flow of preparing to use printer is below.
3. Install to your wireless LAN by either method.
❏ Using utility (TMNet WinConfig)
❏ Using browser
(See "2.6 Installing your wireless LAN" (page 2-14))
2-4 Setup
1. Printer setup
❏ Install Roll Paper
❏ Install the battery pack or connect the printer to the
AC adapter
(See "2.4 Providing power to the printer" (page 2-8))
• with wireless LAN
• with serial connection (RS 232C
• with wireless LAN
When you select
Direct control
method (ESC/
POS command,)
you don't need
to install any
drivers.
2. Adjust various settings (If you need to)
❏ Memory switches
❏ Paper width
(Adjust the spacer & Memory switches)
(See "2.5 Adjusting Various Settings" (page 2-10))
4. Driver setup
❏ OPOS
❏ APD
(See "2.7 Install a Printer Driver in the Host PC
/ POS Terminal," page 2-25)
5. Complete setup
Rev. D