Status Sheet Printing - Epson TM-P60 Technical Reference Manual

The printer is ready to receive data as soon as it completes the self test.
Note:
If you want to pause the self test manually, press the FEED button. Press the FEED button again to
continue the self test.

3.5.2 Status sheet printing

The status sheet describes the wireless LAN setting of printer. This sheet is useful to confirm the
current wireless LAN status.
*** Dynamic Status Sheet ***
802.11b Interface
MAC Address
Hard Version
Soft Version
WLAN Pri F/W
WLAN STA F/W :8.42.1
Allowed Channel :07ffh
To print a status sheet, follow the procedure below.
1. Make sure the printer is turned on. If it is off, turn it on.
1. Open the roll paper cover.
1. Press the FEED button until the printer beeps 1 time. (about 2 seconds).
1. Close the roll paper cover.
1. The printer prints the current LAN status (Status sheet), and then returns to the normal
mode.
Note:
After printing a status sheet, this printer doesn't reset itself (keeps all setting values).
3-4 Troubleshooting
:00-10-c6-24-62-cc
:1.00
:0.83
:4.4.1
A example of status sheet
Wireless Status
SSID :EpsonNetIBSS
Network Mode
Link Status
Channel
Transmission Rate :11Mbps
Access Point
Signal Level
Noise Level
TCP/IP Status
IP Address
Subnet mask
Default Gateway :0.0.0.0
:Ad-Hoc
:Connect 1
:6
:00-0a-79-26-fd-04
:-60dbm
:-85dbm
:192.168.198.168
255.255.255.0
Rev. D