Chapter 2 Basic Operation; Powering On And Off; Switching On And Off The Psu Switch On The Power Supply Unit; Figure 2.1 On Position (Marked "|") Of The Psu Switch On A Power Supply Unit - Fujitsu ETERNUS DX200F Operation Manual

Chapter 2
Basic Operation
This chapter explains how to turn on and off the ETERNUS DX and how to operate the FUNCTION button on
the controller enclosure.
2.1

Powering On and Off

This section explains how to turn on and off the ETERNUS DX.
2.1.1

Switching On and Off the PSU Switch on the Power Supply Unit

This section explains how to move the PSU switch of the power supply unit to the ON and OFF positions.
■
To Switch to ON
Turn the PSU switch of the power supply unit to the ON position (marked "|").
Make sure all of the PSU switches are in the ON position.

Figure 2.1 ON Position (Marked "|") of the PSU Switch on a Power Supply Unit

Power supply unit (PSU#0) Power supply unit (PSU#1)
19
FUJITSU Storage ETERNUS DX200F All Flash Array Operation Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-8472-01ENZ0