Using The User Menu (Example Menu Operation); Output; Superimpose 04.Lcd; 05.Rec Function - Sony PDW-F800 Operation Manual

To display the TOP menu when another
menu is displayed
Move b to "TOP" displayed at the top right of
each page of the menu, and press the MENU
knob. Or flick the CANCEL/PRST/ESCAPE
switch repeatedly to ESCAPE until the TOP
menu is displayed.
Using the USER menu (example
menu operation)
This section explains menu operations using the
USER menu as an example. The operations are
the same for the ALL, OPERATION, PAINT,
MAINTENANCE, and DIAGNOSIS menus.
For details about how to operate the USER MENU
CUSTOMIZE menu, see "Editing the USER menu"
(page 210).
1
Set the MENU ON/OFF switch to ON.
Normally, the USER menu appears.
If it does not, turn the MENU knob to move
b to USER in the TOP menu, and press the
MENU knob.
If the USER menu has been used before, the
last accessed page appears. In this case, go to
step 2.
If this is the first time the USER menu has
been displayed, the CONTENTS page of the
USER menu appears. In this case, follow the
procedure below.
1 Press the MENU knob. Then turn the
MENU knob to move b to the desired
page number.
?U00 CONTENTS

01.OUTPUT 1

02.OUTPUT 2
03.SUPERIMPOSE
04.LCD

05.REC FUNCTION

06.ASSIGNABLE SW

07.VF DISP 1
08.VF DISP 2
09.'!' LED
10.MARKER 1
This indicates that the menu
screen can be scrolled.
2 Press the MENU knob again.
The page selected in 1 is displayed.
Go to step 3.
When you set items on the ALL,
OPERATION, PAINT, MAINTENANCE,
FILE, and DIAGNOSIS menus, move b to
the menu that contains the desired item in the
TOP menu, and then press the MENU knob.
2
Turn the MENU knob until the desired
page appears.
?005 REC FUNCTION
CACHE/INTVAL REC:
DISC EXCHG CACHE:
CLIP CONT REC
LIVE LOGGING
(The figure shows the PDW-700 menu.)
3
Press the MENU knob.
b and z appear.
005 REC FUNCTION
CACHE/INTVAL REC:
DISC EXCHG CACHE:
CLIP CONT REC
LIVE LOGGING
4
Turn the MENU knob to move b to the
desired item, and then press the MENU
knob.
b changes to z, and z changes to ?.
5
Turn the MENU knob to change the
setting.
Depending on the direction of turning the
TOP
knob, the setting value increases, decreases,
switches between ON and OFF, and so on.
To interrupt changing the settings
Set the MENU ON/OFF switch to OFF.
By setting the MENU ON/OFF switch to ON
again, the values that were displayed when
you interrupted the setting operations will
reappear so you can continue making
settings.
6
Press the MENU knob.
z changes to b, and ? changes to z. The
selection is confirmed.
TOP
OFF
OFF
: OFF
: OFF
TOP
OFF
OFF
: OFF
: OFF
Menu Operations 209