Ipod ® (Optional); Playback; Searching For A Desired Song/Title - Alpine iDA-X200 Owner's Manual

01CT00iDAX200.book Page 9 Monday, November 19, 2007 11:29 AM
®
iPod
(Optional)
iDA-X200
Double Action
encoder
/
/ENTER
SOURCE
iDA-X300
Rotary encoder
/
/ENTER
SOURCE
®
An iPod can be connected to this unit by using the proprietary
TM
ALPINE FULL SPEED Connection Cable (KCE-422i) (iDA-X200
sold separately/iDA-X300 supplied) (or the iPod Dock interface cable
(supplied, iDA-X200 ). When this unit is connected by using the
only)
cable, the controls on the iPod are not functional.
• Only 5th generation iPod, first generation iPod nano and second
generation iPod nano can be connected via a USB device (iDA-X200
only).
• Set AUX+ to OFF when an iPod is connected (refer to "Setting the
AUX+ Mode" on page 21).
• If the Bluetooth Box and an iPod are connected at the same time, be
sure to disconnect the iPod from the Bluetooth Box while turning
ACC to OFF.
About iPods usable with this unit
• The unit can be used with the fourth generation and above
iPod, iPod photo, iPod mini, the first generation iPod nano or
the second generation iPod nano only. However, future
generation iPod compatibility cannot be guaranteed.
• Touch wheel or scroll wheel type iPods without the dock
connector cannot be connected to the unit.
• The unit can be used with the following iPod.
<USB connected> (iDA-X200 only)
Fifth generation iPod
First generation iPod nano
Second generation iPod nano
<Directly connected>
Fourth generation iPod
Fifth generation iPod
iPod photo
iPod mini
First generation iPod nano
Second generation iPod nano
• If the unit is used with iPod software versions of iTunes earlier than
7.1.0.59, correct function and performance are not guaranteed.
01GB05iDAX200.fm

Playback

1
Press
IPOD (iDA-X200 only) mode.
2
FUNC./SETUP
Press
Return to the beginning of the current song:
Press
Fast backward through current song:
Press and hold
Advance to the beginning of the next song:
Press
VIEW
Fast forward through current song:
Press and hold
3
To pause playback, press
FUNC./SETUP Pressing
• If a song is playing on the iPod when it is connected to this unit, it
will continue playing after the connection.
• An episode or audiobook may have several chapters, the chapter can
be changed by pressing

Searching for a desired Song/Title

VIEW
An iPod can contain hundreds of songs. By keeping these songs
organized in playlists, this unit can use these to ease song searches.
Using the Playlist/Artist/Album/Podcast/Audiobook/Genre/Composer/
Song search mode's individual hierarchy, you can narrow down your
search as shown in the table below.
Hierarchy 1
PLAYLISTS
ARTISTS*
ALBUMS*
PODCASTS
AUDIOBOOKS
GENRES*
COMPOSERS*
SONGS
• You can select your preferred search mode. Refer to "iPod Search
Mode Setting" (page 22).
For example: Searching by Artist name
The following example explains how an ARTISTS search is
performed. Another search mode can be used for the same
operation, although the hierarchy differs.
1
Press
2
Turn the Double Action encoder (iDA-X200 only)
or Rotary encoder (iDA-X300 only) to select the
ARTISTS, and then press
The artist search mode is activated and artists names are
displayed.
3
Turn the Double Action encoder (iDA-X200 only)
or Rotary encoder (iDA-X300 only) to select the
desired Artist, and then press
The album search mode is activated and albums names are
displayed.
SOURCE to switch to the IPOD or USB
or to select the desired song.
.
.
.
.
/ .
/ again will resume playback.
or .
Hierarchy 2 Hierarchy 3
SONG —
ALBUM* SONG
SONG —
EPISODE —
— —
ARTIST* ALBUM*
ALBUM* SONG
— —
/ENTER to activate the Menu Select mode.
/ENTER.
/ENTER.
ALPINE iDA-X200 68-09359Z65-A (EN)
Hierarchy 4
—
—
—
—
—
SONG
—
—
9
-EN